• 1640 Photon Mask
  • 1640 Photon Mask
  • 1640 Photon Mask
  • 1640 Photon Mask
  • 1640 Photon Mask
  • 1640 Photon Mask

1640 Photon Mask

Main Functions: Multi-color Phototherapy 

The 1640 Photon Mask offers advanced non-invasive skin rejuvenation using eight-color wavelengths, ideal for clinical and professional custom face mask skin care treatments targeting face and neck areas. 

Featuring 608 high-density LEDs with a silicone lens design, this red light therapy mask boosts photon delivery by 30%, ensuring consistent, efficient multi-wavelength phototherapy performance. 

Designed for ergonomic comfort and extended sessions, this led light therapy mask integrates seamlessly into professional skincare protocols, enhancing treatment effectiveness and delivering reproducible clinical results.
$39.90
  • 1640 Photon Mask
  • 1640 Photon Mask
  • 1640 Photon Mask

SPECIFICATION

Product description:
1. For beauty Mask: 8 sets of LED lights (352 LED diodes);
2. Independent, one-piece eye mask with a gradient, thinning design for easier installation, so more skin-friendly;
3. 8-color phototherapy;
4. Lightweight (177g only), so does not put more weight on face;
5. Transparent silicone with a concave-convex LED lights, which amplifies the lighting effect by 30% compared to ordinary masks;
6. Silicone Rubber: food-grade silicone used in order of human-friendly application;
7. Battery capacity of Controller: 1500mAh.


Highlight in One Sentence:
Lightweight design (eyes-friendly), and the concave-convex lighting effect is increased by 30%.

Product Advantages:

Design and System Integration Strengths

The 1640 Photon Mask exhibits a modular three-part design comprising a face mask, an independently contoured eye mask, and a neck mask, facilitating targeted light delivery and ergonomic fit. Constructed using food-grade silicone combined with ABS, it balances durability with patient comfort in extended use. Its concave-convex lens arrangement achieves superior photon density, increasing light intensity by approximately 30% compared to conventional masks. This architecture supports both standalone and combined usage scenarios, optimizing treatment customization. Additionally, dual USB-C interfaces and dual-controller setups bolster operational flexibility, allowing integration into professional skincare systems without disruption.

Operational Efficiency and User Ergonomics

The unit’s lightweight structure (face mask at 177 g) and flexible silicone materials contribute to comfortable wear during therapeutic sessions, essential for patient compliance. Battery capacity supporting up to 1.5 hours of continuous LED phototherapy matches typical clinical treatment durations, permitting process standardization. The pre-set eight-color output streamlines therapy choices, facilitating efficient protocol execution and reducing operator error. Regulatory certifications ensure seamless acceptance into regulated healthcare environments, enhancing device reliability and risk management. This red light mask delivers dependable performance conducive to high-volume skincare settings.

 

Use Scenarios:

Integration into Clinical Dermatology Treatments

In dermatology practices focusing on phototherapeutic skin treatments, this led light therapy mask serves as a primary device for non-invasive skin rejuvenation, wrinkle reduction, and pigmentation management. Operating within tightly controlled clinical environments, the mask’s multi-wavelength LED array enables clinicians to deliver systematic treatments calibrated to individual patient profiles. Its ergonomic design allows compatibility with clinical workflow procedures, including follow-ups and combination therapies. The product’s reliable charging mechanism and consistent output aid in maintaining treatment schedules, while compliance with international medical device standards ensures operational safety and regulatory adherence.

Incorporation in Professional Spa and Wellness Centers

The photon mask facilitates advanced light therapy protocols in spa and wellness centers where skin health optimization is prioritized. This system enhances the efficacy of complementary services by supporting treatments that stimulate collagen, improve skin tone, and reduce inflammation through precise red and infrared light emissions. Its dual face and neck coverage enables comprehensive care within a single session, maximizing client throughput without sacrificing treatment quality. Integration into spa operational models is straightforward due to its intuitive controller and rapid charging capabilities, ensuring smooth client workflow and minimizing downtime. The device meets safety and quality certifications expected in premium spa environments.




Product Specifications:

Item Descriptions Remarks
General Product Description
Product Name: 1640 Set: Photon Face Mask + Neck Mask
1640 Photon Face Mask
1640 Photon Neck Mask
Brand: Lezim, Coriumsonic, mlike-tech Customized Logo supported
Price: - 1K-3K: 79.0 USD/PC;
- >3K: 74.9 USD/PC
Price for single Face or Neck mask:
- 1K-3K: 39.9 USD/PC;
- >3K: 37.9 USD/PC
Color: Black, Mixed color Customized Colors supported
Certificate: ISO 9001, ISO 14001, ISO 45001, BSCI, FDA, CE, RoHS, TUV, etc.
Material: ABS + Flexible Silicone Food-grade silicone used in order of human-friendly application
Product size (L x W x T): - Face mask: 291*189*3 mm;
- Neck mask: 329*220.5*3 mm;
- Controller: 120*48*31.5 mm
Net weight of bare machine:  - Face mask: 177g;
- Neck mask: 165g;
- Two in One: 342g;
- Controller: 154g
Design Characteristics
Charging Power Supply:  5V,2A, 2h for full charging Fully operating time after full charging: ~1.5h
Power supply method:  Micro charging
Function configuration: 8-color phototherapy:
7-color beauty lights + 1 Infrared light, face and neck combined into one
8-color = 7-color beauty lights + 1 Infrared light
Product functions: Comprehensive nutrition introduction + chest care + back care
Design Features - 1:
LED Lighting
- Face mask: 88 sets of LED lights (352 LED diodes);
- Neck mask: 
64 sets of LED lights (256 LED diodes)
Design Features - 2:
Installation
Independent, one-piece eye / neck mask with a gradient, thinning design for easier installation, so more skin-friendly
Design Features - 3:
Lighting efficiency
Transparent silicone with a concave-convex LED lights, which amplifies the lighting effect by 30% compared to ordinary masks
Printing: Screen Printing for Graphic
Battery Capacity: - Battery capacity of Controller for Face mask or Neck Mask: 1500mAh;
- Battery capacity of Controller for Face mask + Neck Mask: 
3000mAh
For 2-in-1 set (Face + Neck mask):
- 2 Type C interfaces are integrated into the controller for the control of both Face mask & Neck mask at the same time, can also be connected into anyone of them for independent operation
OEM / ODM Design: Customized ODM design Supported
Samples: To be aligned, in general should be paid for samples
Highlight / Award: - Winner of the German iF Award;
- Winner of Taiwan Golden Pin Design Award
Packaging & Logistics
Packaging Size of one piece: Packaging size: 33.7*23.8*4.7cm  With protective padding surrounds the product
Packaging Weight of one piece: - Single face mask: 703g;
- Single neck mask: 694g;
- Face mask + neck mask: 900g
Including the weight of packaging bag, Product Instructions, product installation bandage, etc.
Packaging quantities of one carton box: 20 pcs/carton box 
Packaging Size of one carton box: Carton size: 34.5*48.5*49cm
Packaging Weight of one carton box: - Only face mask: 15.1kg;
- Only neck mask: 14.9kg;
- Face mask + neck mask: 19kg
Logistics: The normal lead time for production is 25-30 calendar days. For Customized design (Logo, Color, or design changes based on current SOP product), the LT time shall be aligned seperately.
Payment Term
Payment Conditions: In general, 50% payment for order (and productions), and 50% payment before shipping. - We are one of the global Top5 OEM Manufactures, so we put more efforts in design, development, and productions, and thus the payment terms we offered is simple and staight-forward.
- Other payment terms can be negotiated in case of  slight differences vs the general one.
Key Customers
Key ODM Customers: - L'Oréal (France);
- Hyundai Cosmetics (South Korea);
- Nippon Shinyaku Group (Japan);
- SK-II (South Korea)
And more OEMs from US, EU, etc. who do not want to declare their ODM partner.
Our Product Philosophy:  Let the product shine naturally We only produce products with high qualities, market-driven, and will take tremendous values to customers.


Notes:
  1. All products are CE/ROHS certified;
  2. All products are patented;
  3. The normal lead time for mass production is 25-30 days;
  4. Plant visits / audits for customers are available;
  5. Standardized design and production procedures are implemented for best quality.


FAQ

1.What materials are used to manufacture the 1640 Photon Mask?
The 1640 Photon Mask is constructed with food-grade flexible silicone and durable ABS plastic, ensuring safety and comfort during use. These materials support the mask's lightweight design and skin-friendly properties, ideal for prolonged LED light therapy sessions with the red light therapy mask and other phototherapy modes.

2.Is customization available for the 1640 Photon Mask to meet specific business needs?
Yes, the 1640 Photon Mask supports product customization, allowing B-end clients to tailor features such as color options, controller configurations, and packaging. This flexibility addresses varied client requirements for a custom face mask skin care device suitable for diverse markets.

3.How is the 1640 Photon Mask installed and maintained for optimal performance?
The mask features a transparent silicone structure with gradient thinning, facilitating easy and skin-friendly installation, especially around the eye area. Regular cleaning with a soft cloth and avoiding harsh chemicals preserves the silicone and LED components, maintaining the efficacy of this led light therapy mask.

4.What certifications ensure the quality and safety of the 1640 Photon Mask?
The product complies with multiple international standards, including ISO 9001, ISO 14001, ISO 45001, FDA, CE, RoHS, and BSCI certifications. These attest to rigorous quality control, environmental responsibility, and user safety, supporting long-term trust in this LED phototherapy device.


Product Overview

The mask is a wearable phototherapy unit for the face: 88 sets of LEDs, 352 diodes in total, set into a transparent food-grade silicone shell that sits directly on the skin. The 8 color LED face mask runs all eight programs from a palm-sized controller, so a therapist sets the treatment once and the mask delivers it without being held in place.

We are a red light therapy mask manufacturer with our own LED layout, silicone mould and controller firmware, which is why colour, print and controller pairing can be adapted for a brand without rebuilding the silicone LED face mask. The Shenzhen plant behind it also produces for brands such as L'Oréal, Hyundai Cosmetics, Nippon Shinyaku Group and SK-II.

Because it is a lightweight LED face mask by construction rather than by trim, it moves easily between professional and home-use lines. Dermatology and aesthetic clinics use it for non-invasive rejuvenation, wrinkle and pigmentation protocols; spas and wellness centres build it into facial treatments; distributors and brand owners carry it as the anchor of a led face mask wholesale range.

Most red light therapy mask OEM briefs we handle start from this platform and keep the optics, changing the finish instead: housing colour, print, controller pairing. Where a brief touches geometry or firmware, it becomes a development project with its own schedule rather than a variation on a stock model.

For a brand owner, a led face mask private label run is the fastest route in: the standard shell, your colour, your logo, your packaging artwork and a controller matched to what you are selling. That keeps the first order small enough to test the market and still leaves room to develop a second, differentiated model once the listing proves itself.

Light Output & Color Modes

  • 352 diodes in 88 sets — the face mask carries 88 sets of LEDs, 352 diodes in total, spread so the array covers forehead, cheeks and jaw together instead of pooling light in the middle of the face, which is the coverage a red light therapy mask for acne protocol depends on.
  • Eight programs, seven plus one — the 8 color LED face mask menu is made up of seven beauty lights and one infrared light. The outputs are pre-set rather than mixed by hand, so a therapist chooses a program and the mask holds it for the session.
  • A lens, not a window — the silicone LED face mask has a transparent shell moulded with concave-convex LED lenses. Against an ordinary flat mask, the same power produces about 30% more lighting effect, which is the single biggest difference between this device and a commodity mask.
  • What that extra 30% is worth — more light per diode means a shorter exposure or a lower power draw for the same delivery. In a busy room that is what keeps a schedule intact without pushing the controller harder through the day.
  • Red and infrared lead — most briefs open with these two settings, and they are what brands selling into younger, oilier skin profiles build a device around.
  • Consistent output, start to finish — the controller holds a stable supply instead of dimming as the charge falls, so the last client of the afternoon receives the same light as the first.

Fit, Weight & Skin Contact

Weight sits where it should. On the head that leaves a lightweight LED face mask which does not load the nose bridge or pull at the ears while a session runs. The eye section is a one-piece element with a gradient, thinning profile: the silicone tapers around the sockets instead of standing off them, so the mask settles against the orbital bone. Eye cut-outs and a mouth opening keep the light on the treatment area and let the client speak or breathe normally. Two points hold it in place — an adjustable strap at the back and buckles at the sides. Set the strap first so the mask sits level, then close the buckles to bring the silicone into even contact. Over-tightening lifts the eye section, so snug is enough; that is the adjustment most new operators get wrong. The shell is soft silicone over an ABS frame, so the contact layer follows a cheekbone or a wider jaw rather than resting on the high points. On a silicone LED face mask, that flexibility is the difference between a client who forgets it is on and one who asks to stop early.

Session Setup

  1. Clean and dry the skin — dry skin keeps the silicone from sliding and keeps residue off the lens.
  2. Leave oil-based serums off the treatment area before the mask goes on.
  3. Check the array before fitting — power the mask on and look through the transparent shell; every group should be lit. A dark group is caught in seconds this way instead of halfway through a session.
  4. Set the program — eight pre-set outputs sit on the controller; choose the one your protocol calls for before the mask is fitted.
  5. Run the session — the lightweight LED face mask stays where it was set, so the operator is free between checks.
  6. Note the program used, so the next visit repeats it rather than guessing. Reset between clients — power off, disconnect the controller and wipe the shell before the next client, which matters all the more when the mask is used as a red light therapy mask for acne. Full cleaning and storage guidance sits in the questions below.

Specifications

Item Descriptions Remarks
General Product Description
Product Name: 1640 Set: Photon Face Mask + Neck Mask
1640 Photon Face Mask
1640 Photon Neck Mask
Brand: Lezim, Coriumsonic, mlike-tech Customized Logo supported
Price: - 1K-3K: 79.0 USD/PC;
- >3K: 74.9 USD/PC
Price for single Face or Neck mask:
- 1K-3K: 39.9 USD/PC;
- >3K: 37.9 USD/PC
Color: Black, Mixed color Customized Colors supported
Certificate: ISO 9001, ISO 14001, ISO 45001, BSCI, FDA, CE, RoHS, TUV, etc.
Material: ABS + Flexible Silicone Food-grade silicone used in order of human-friendly application
Product size (L x W x T): - Face mask: 291*189*3 mm;
- Neck mask: 329*220.5*3 mm;
- Controller: 120*48*31.5 mm
Net weight of bare machine:  - Face mask: 177g;
- Neck mask: 165g;
- Two in One: 342g;
- Controller: 154g
Design Characteristics
Charging Power Supply:  5V,2A, 2h for full charging Fully operating time after full charging: ~1.5h
Power supply method:  Micro charging
Function configuration: 8-color phototherapy:
7-color beauty lights + 1 Infrared light, face and neck combined into one
8-color = 7-color beauty lights + 1 Infrared light
Product functions: Comprehensive nutrition introduction + chest care + back care
Design Features - 1:
LED Lighting
- Face mask: 88 sets of LED lights (352 LED diodes);
- Neck mask: 
64 sets of LED lights (256 LED diodes)
Design Features - 2:
Installation
Independent, one-piece eye / neck mask with a gradient, thinning design for easier installation, so more skin-friendly
Design Features - 3:
Lighting efficiency
Transparent silicone with a concave-convex LED lights, which amplifies the lighting effect by 30% compared to ordinary masks
Printing: Screen Printing for Graphic
Battery Capacity: - Battery capacity of Controller for Face mask or Neck Mask: 1500mAh;
- Battery capacity of Controller for Face mask + Neck Mask: 
3000mAh
For 2-in-1 set (Face + Neck mask):
- 2 Type C interfaces are integrated into the controller for the control of both Face mask & Neck mask at the same time, can also be connected into anyone of them for independent operation
OEM / ODM Design: Customized ODM design Supported
Samples: To be aligned, in general should be paid for samples
Highlight / Award: - Winner of the German iF Award;
- Winner of Taiwan Golden Pin Design Award
Packaging & Logistics
Packaging Size of one piece: Packaging size: 33.7*23.8*4.7cm  With protective padding surrounds the product
Packaging Weight of one piece: - Single face mask: 703g;
- Single neck mask: 694g;
- Face mask + neck mask: 900g
Including the weight of packaging bag, Product Instructions, product installation bandage, etc.
Packaging quantities of one carton box: 20 pcs/carton box 
Packaging Size of one carton box: Carton size: 34.5*48.5*49cm
Packaging Weight of one carton box: - Only face mask: 15.1kg;
- Only neck mask: 14.9kg;
- Face mask + neck mask: 19kg
Logistics: The normal lead time for production is 25-30 calendar days. For Customized design (Logo, Color, or design changes based on current SOP product), the LT time shall be aligned seperately.
Payment Term
Payment Conditions: In general, 50% payment for order (and productions), and 50% payment before shipping. - We are one of the global Top5 OEM Manufactures, so we put more efforts in design, development, and productions, and thus the payment terms we offered is simple and staight-forward.
- Other payment terms can be negotiated in case of  slight differences vs the general one.
Key Customers
Key ODM Customers: - L'Oréal (France);
- Hyundai Cosmetics (South Korea);
- Nippon Shinyaku Group (Japan);
- SK-II (South Korea)
And more OEMs from US, EU, etc. who do not want to declare their ODM partner.
Our Product Philosophy:  Let the product shine naturally We only produce products with high qualities, market-driven, and will take tremendous values to customers.

Customization & Private Label

  • Three brand names to ship under — the housing can carry Lezim, Coriumsonic or mlike-tech, or your own mark if you are running a led face mask private label programme.
  • Housing colour — black and mixed colour are standard and custom colours are supported.
  • Colour is fixed at tooling stage, so settle it before the print files are approved.
  • Logo and graphics — as a red light therapy mask manufacturer we screen-print graphics in-house, so logos and the mode markings for the 8 color LED face mask go on in the same run as the shell instead of sitting on the surface as a decal that can lift.
  • What stays fixed — the LED array, the concave-convex lens mould and the silicone wall thickness.
  • Changing those means new tooling, so treat them as the platform you are buying.
  • Artwork approval in writing — print files, colour references and the brand name are confirmed before the run starts; changes after that point cost time rather than money alone.
  • Repeatability for volume programmes — on led face mask wholesale orders the shell, print and controller are kept identical from run to run, so the second shipment matches the first on shelf.
  • Selling under a customer's own brand — the label and instruction book are prepared from your copy, which is the usual route for pharmacy and department-store programmes.

Ordering, Payment & Delivery

  1. Agree the model mix and quantity — orders normally start at 1,000 pieces, and the face mask can be taken on its own or paired with the neck mask. A led face mask wholesale range usually begins with the face mask and adds the neck unit once the listing has proven itself.
  2. Check the current price tier — the face mask is listed at 39.9 USD per piece between 1,000 and 3,000 pieces and 37.9 USD per piece above 3,000; the two-in-one set at 79.0 and 74.9 USD per piece. Confirm the current figures with your sales contact before you quote your own market.
  3. Align a sample, and a visit if useful — samples are generally charged, so ask your sales contact what is available for your configuration and how it is handled. Plant visits and customer audits can be arranged at the same time.
  4. Approve colour, print and artwork — your logo, mode markings and packing artwork are signed off before production begins, so a led face mask private label order does not stall at the print stage.
  5. Scope anything beyond cosmetics — if your red light therapy mask OEM requirement touches firmware, LED layout or housing geometry, it is quoted and scheduled as a development at this point rather than as a print change.
  6. Place the order — as a general rule 50% is paid with the order and 50% before shipping, and other payment terms can be negotiated where your situation differs slightly from that. We work as one of the global top-five OEM manufacturers in this category, which is why the terms stay this simple.
  7. Production and lead time — normal production runs 25–30 calendar days from purchase order. Customized designs are scheduled separately, with the lead time aligned to the changes involved.
  8. Plan cartons and freight — 20 pieces per carton in a 34.5 × 48.5 × 49 cm box; a face-mask-only carton weighs 15.1 kg, a neck-only carton 14.9 kg and a mixed carton 19 kg. Single packed pieces measure 33.7 × 23.8 × 4.7 cm and weigh 703 g for a face mask, 694 g for a neck mask or 900 g for both, including the packaging bag, instructions and installation bandage.

Scale & Supply Capability

Lezim (Shenzhen) Technology Co., Ltd. is a Shenzhen-based factory and an affiliate of Lezim Group (Japan) Co., Ltd., with product design and core technologies originating from our Japanese parent company. Around 100 employees work across 5 dedicated assembly lines, backed by 12 QC inspectors, 6 hardware engineers and 5 electronic engineers, and we hold 118 patents and certifications. We have passed EU BSCI and ISO audits and obtained U.S. FDA approval. Our OEM/ODM system supports custom colour, packaging and configuration, and we serve beauty brands, clinics and salons across the USA, EU, Korea and Japan.

FAQ

What materials go into the mask?

The skin-contact layer is food-grade silicone carried on an ABS frame, and the same transparent food-grade silicone forms the lens array over the LEDs. Food-grade silicone is specified because that surface sits against the face for a whole session and is cleaned after every use; it stays soft and does not go tacky with normal wiping. The controller housing is rigid ABS.

Can the mask be customized for our brand and our market?

Yes. Housing colour, logo, printed graphics, controller pairing and packaging can all be adapted on existing tooling, and customized ODM design is supported when a change goes deeper than cosmetics. A red light therapy mask OEM brief that alters the LED layout, mask geometry or firmware goes to our engineering team as a development with its own schedule. Send the artwork, the brand name and the market you are selling into, and we will confirm which items sit on current moulds and which need new ones.

How should the mask be cleaned and stored?

Wipe the silicone and the transparent lens with a soft cloth and a mild soap solution after each session, then let it air-dry before storage. Keep alcohol, acetone, abrasive pads and oil-based products away from the lens, because solvents cloud the silicone and dull the light path. Store the mask flat with the controller disconnected, and avoid folding the shell back on itself for long periods.

Which certifications support the quality and safety of the device?

The product comes out of a plant holding ISO 9001, ISO 14001 and ISO 45001 certification together with BSCI and FDA approval, and the range carries CE and RoHS certification and TUV testing. All products in the line are CE/RoHS certified and patented, and the design has taken both the German iF Design Award and the Taiwan Golden Pin Design Award. Because the scope of a certificate can differ by model and by market, confirm the specific documents your territory or distribution channel requires when you place the order.

Can the face mask be used on its own?

Yes. Each mask runs from its own 1500 mAh controller and does not depend on a second device, so a clinic or brand can launch with the face mask alone and widen the protocol later. A 3000 mAh controller with dual Type-C ports exists for buyers who want one unit to drive a face and neck mask at the same time.

What is in the box, and what should be checked on arrival?

A packed piece contains the mask, its controller, the installation bandage and the product instructions, with protective padding around the device — which is why a single packed face mask weighs 703 g against the 177 g bare weight. Before putting a unit into service, check the shell and lens for transit marks and power the mask on to confirm every LED group lights.

Is it suitable for oily or blemish-prone skin?

Red and infrared are the two programs most often used for oily and blemish-prone clients, and they are the reason the unit is frequently developed as a red light therapy mask for acne-prone skin. Keep it framed as cosmetic light therapy rather than a medical treatment, and make sure the claim language on your packaging matches the regulations of your market. Start blemish-prone users at the shorter end of your own protocol and build up from there.

Leave a message
Name *
Email *
Message *
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.